[Rtai] I cannot go by RTAI-3.6 whit kernel 2.6.23

yfcabezas at unicauca.edu.co yfcabezas at unicauca.edu.co
Wed May 7 17:36:05 CEST 2008


Hi !!  

I already solved the problem for go to the new kernel compiling 

Add the unforcing=0 in the grub.conf  line
Kernel /boot/bzimage-2.6.23..............     unforcing=0

My RT-Task is OK Already  I can to see the signals !!!  I appreciate all your colaboration !!

thanks very much!!

Now I am designing   a system control Industrial PID  for a system of Tanks !!   I look forward with it's aid!!   

regards!!

Yonny Fernando Cabezas Ortiz
Ingineering  Automatic ndustrial
University of the Cauca - Colombia


-----Mensaje original-----
De:Paolo Mantegazza <mantegazza at aero.polimi.it>
Fecha:07 de May de 2008

yfcabezas at unicauca.edu.co wrote:
> Hi!!  Again 
> 
> After, I tried running my RT-task, I decided install rtai-3.6 with kernel
2.6.23, the instalacion had no problems, but when I go by the new kernel
compiled to start the system appears on the screen:
> 
> Booting 'Fedora Core (2.6.23-rtai)'
> root(hd0,5)
> Filesystem  type is ext2fs, partition type 0x83
> karnel /boot/vmlinuz-2.6.23-rtai ro root=LABEL=/, hgb quiet
> [Linux -bzImage, setup=0x2800 , size=0x1873c8]
> initrd /boot/initrd-2.6.23-rtai.img
> [Linux-initrd @ 0x1bf80000, 0x5fa66 bytes]
> 
> 
> Uncompressing Linux ... OK, booting the kernel
> Red Hat nash version 4.1.18 starting
> Enforcing mode request but no policy loaded, Halting now
> kernel panic-not syncing: Attempted to kill init!
> 
> What is your opinion??
> My distro is the same Fedora Core3
> I need your help again!!
> 

Forget RTAI and its patch for a while. You have to learn to make a 
standard kernel work. I think that soemthing is wronmg in your 
configuration but is difficult to say what.

Paolo.

> 
> 
> Yonny Fernando Cabezas Ortiz
> Ingineering  Automatic Industrial
> University of the Cauca - Colombia
> 
> 
> --------------------------------------
> MENSAJE ENVIADO CON WMAIL 1.01
> UNIVERSIDAD DEL CAUCA
> 
> 
> 



--------------------------------------
MENSAJE ENVIADO CON WMAIL 1.01
UNIVERSIDAD DEL CAUCA




More information about the Rtai mailing list